02244.30M A N U A LSIMRADCA/CR40/42/50/52Installation manual183-0512-702 English
CA/CR40/42/50/52 Installation manual Chapter 1110Flush mounting for CA/CR50: Removable corners, example:Min. clearance forcables: 18 cm.See template f
CA/CR40/42/50/52 Installation manual Chapter 1111330 (13)88.8 (3.5)131.6 (5.2)391.6 (15.4)433.9 (17)460 (18.1)9.2 (0.4)11.3 Installation of CA/CR52 Na
CA/CR40/42/50/52 Installation manual Chapter 1112Flush mounting for CA/CR52: Removable corners, example:Min. clearance forcables: 18 cm.See template f
CA/CR40/42/50/52 Installation manual Chapter 111311.4 Place of installation of display unitThe display unit can be installed on desktop, wall surface,
CA/CR40/42/50/52 Installation manual Chapter 111411.6 Installation of Dual Station DS40/42/50/52The DS models are remote control units for the CA/CR40
CA/CR40/42/50/52 Installation manual Chapter 1115The connection cable between the dual station and the main unit is a special pair-twisted cable of 15
CA/CR40/42/50/52 Installation manual Chapter 1116567213411.7 Installation of the GPS / DGPS antennaThe antenna must be placed in a position where tall
CA/CR40/42/50/52 Installation manual Chapter 11174°°°°411.8 Electrical connections(connectors, seen from solder side)The PWR receptacle will accommoda
CA/CR40/42/50/52 Installation manual Chapter 1118RADAR1: +250V, Violet2: +24V, Blue3: +12V, Orange thick4: GND, Yellow5: DATA RETURN, Red shield6: DAT
CA/CR40/42/50/52 Installation manual Chapter 111911.8.2 FuseWarning! A fuse should always be installed to protect the unit.Using a fuse which is not s
CA/CR40/42/50/52 Installation manual Chapter 1120Transducer connections! Warning!Transducers containing speed log sensor e.g. Airmar B744V must never
CA/CR40/42/50/52 Installation manual Chapter 112111.8.4 NMEA0183 interface connectionsNMEA0183 interface connections are made to the receptacle marked
CA/CR40/42/50/52 Installation manual Chapter 112211.10 Optional connectionsGeneral e.g. Autopilot or performance instrumentsCA/CR40/42/50/52 NMEAPin 6
CA/CR40/42/50/52 Installation manual Chapter 112311.11 Basic transducer and cable information(CA models)For optimum performance of the Echosounder, th
CA/CR40/42/50/52 Installation manual Chapter 112411.11.1 Transducers (optional)Simrad Combi-transducers C50/200 or C38/200>File:50200.cdr<Combi
CA/CR40/42/50/52 Installation manual Chapter 1125Airmar P319Thru-hull mount(not for use in wood hulls)Frequency: 50/200 kHzBeamwidth: 45° /15°Cable le
CA/CR40/42/50/52 Installation manual Chapter 1126Airmar SS505Thru-hull stem mount Ref. No.179.0401.011Accommodates hull thickness: Optional fairing.Mi
CA/CR40/42/50/52 Installation manual Chapter 1127Airmar B744VThru-hull triducerFrequency: 50/200 kHzBeamwidth: 45° /15°Cable length: 10m (32’)Speed, t
CA/CR40/42/50/52 Installation manual Chapter 1128poor performance. Due to the varying design of ship’s hulls and differentoperating speeds, there can
CA/CR40/42/50/52 Installation manual Chapter 112911.12 Installation of scanner unitAradar’s target detection capacity varies greatly depending on the
CA/CR40/42/50/52 Installation and service manual Table of contents11. Installation and service11. Installation notes...
CA/CR40/42/50/52 Installation manual Chapter 113011.12.1 Shifting away from obstaclesShifting from keel line: By shifting the scanner position from th
CA/CR40/42/50/52 Installation manual Chapter 113111.12.2 Mounting of scannerDeciding the place of installation, a minimum distance must be considered
CA/CR40/42/50/52 Installation manual Chapter 1132Center14014012φ×5Measurements = mm60Forward(5.51 in.)(2.36 in.)(0.47 in.)30(1.18 in.)For air tube(5.5
CA/CR40/42/50/52 Installation manual Chapter 1133RB715A Radome scanner• 65cm radome• 4kW• Range up to 36nm• Rotationspeed24or48rpm• Beamwidth: Horizon
CA/CR40/42/50/52 Installation manual Chapter 1134RB716A Open scanner• 3 or 4ft Open array• 4kW• Range up to 48nm• Rotation speed 24or 48 (24V) rpm• Be
CA/CR40/42/50/52 Installation manual Chapter 1135IMPORTANTFrontRemove the protective cap coveringthe rotary coupler on the top of thescanner. Match th
CA/CR40/42/50/52 Installation manual Chapter 1136cable through the cable inlet, place the rubber ring around the cable, and clampthe cable to the scan
CA/CR40/42/50/52 Installation manual Chapter 1137Fitting interconnecting cable (RB714A):AntennaStern sideShield coverCable shieldRadome (bottom)Fixing
CA/CR40/42/50/52 Installation manual Chapter 1138Fitting interconnecting cable (RB715A):AntennaStern sideShield coverCable shieldRadome (bottom)Fixing
CA/CR40/42/50/52 Installation manual Chapter 1139Interconnecting cable (RB716A)1. Ensure that the radar is off.2. Connect the cable to the receptacle
CA/CR40/42/50/52 Installation and service manual Table of contents
CA/CR40/42/50/52 Installation manual Chapter 1140Fitting interconnection cable (RB716A):TR unit fixing boltsRemove connectorFixing boltFixing plateInt
CA/CR40/42/50/52 Installation manual Chapter 114111.12.4 Connector’s pin numbers and wire colorsThe connecting cable is supplied with the radar antenn
CA/CR40/42/50/52 Installation manual Chapter 1142Connector for the RB716A Radar antennaAlternative colors:Pin 4: GreenPin 5: RedPin 6: WhitePin 7: Bro
CA/CR40/42/50/52 Installation manual Chapter 114311.12.5 Grounding wireConnect grounding wire from one of the bolts used for mounting the scanner unit
CA/CR40/42/50/52 Installation manual Chapter 114411.12.6 AdjustmentWhen you have finished installing the scanner and display units and connectingcable
CA/CR40/42/50/52 Installation manual Chapter 1145GPS Antenna RS5640 DGPS Antenna MGL-3Type: Quadrifilar Helix. Patch (GPS) H-field (diff.).Dimensions:
CA/CR40/42/50/52 Installation manual Chapter 1146Dual frequency transducersSimrad C38/200, 1kW high performance combi transducer 38 and 200kHz,13x21°
CA/CR40/42/50/52 Installation manual Chapter 1147Radar antennas RB714A RB715A RB716ARadome: 45cm 65cmOpen array: 3 or 4 ftScanner: 2kW 4kW 4kWRange: t
CA/CR40/42/50/52 Installation manual Chapter 1148
CA/CR40/42/50/52 Installation and service Index49Agents end of manualConnections,-ECHO1 port 17-ECHO2 port 17-electrical 17-external log/pos-status re
CA/CR40/42/50/52 Installation and service Chapter 11511. Installation notesFor a number of reasons, all user-related decisions, setups, etc. shouldbe
CA/CR40/42/50/52 Installation and service Index50
CA/CR40/42/50/52 Installation and service Chapter 116Other important settings (continued):
CA/CR40/42/50/52 Installation manual Chapter 11711.1 Installation of CA/CR40/42 Navigation CenterThe CA/CR40/42 can be flat or bracket mounted – overh
CA/CR40/42/50/52 Installation manual Chapter 118Flush mounting for CA/CR40/42:Removable corner.Min. clearance forcables: 15 cm.See template for instru
CA/CR40/42/50/52 Installation manual Chapter 119295 (11.6)74 (2.9)116 (4.6)376 (14.8)419 (16.5)445 (17.5)9 (0.4)11.2 Installation of CA/CR50 Navigatio
Komentáře k této Příručce