Airmar H2183—Heading Sensor Uživatelský manuál stáhnout pdf (Strana 7)

Choosing the Mounting Location

For accurate readings, selecting the best location for the sensor is very important.

It can be mounted on either a vertical or a horizontal surface. Choose a location

that balances the requirements below.

• Mount the sensor as close to the vehicle/boat’s center of gravity as possible.

The lower it can be mounted, the more stable it will be, thus giving more

accurate compass readings.

• Mount near the center of the vehicle/boat’s fore-aft axis. This will give more

accurate pitch and roll readings. Avoid the areas near the front/bow and the

rear/stern.

• To prevent interference to the internal magnetic compass, mount the sensor:

- A minimum of 0.3m (1') from other standard and steering compasses.

- Away from any structures or equipment that contains ferrous metals.

- Away from anything that may create a magnetic field such as: magnetized

materials, electric motors, electronic equipment, engines, generators, power/

ignition cables, and batteries. For distances, follow the respective

manufacturer’s recommendations.

- Do not install within a steel vehicle/boat (magnetic material).

• Choose a surface with minimal vibration for more stable data.

• Mount reasonably level (with the waterline on a boat) for accurate pitch and roll

readings.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Žádné komentáře

Airmar H2183—Heading Sensor Uživatelský manuál Strana 7